Keep your right hand on the wheel while flicking the signal lever down with your left hand. Turn on the signal before braking to let other drivers know why you are slowing.
If you see the indicator light blinking or hear the signal sound, reach over to the signal lever with your left hand and gently move it to the “off” position. Failing to turn your turn signal off after you have completed a turn can be illegal and cause confusion for other drivers.
This confusion could lead to an accident or to you being cut off.
Check your side mirror to ensure there is space in the flow of traffic to pull out, then turn your wheel hard to the left and accelerate gently. Return the signal lever to the neutral (starting) position by pushing up gently on it.
While some highways are constructed in such a way that there is no other option but to merge, some on-ramps turn into independent lanes which connect to the next exit if it is nearby. In either case, using your turn signal will alert other highway drivers to your desire to merge, and will give them time to slow down or change lanes in order to let you do so. Look out your left-side window when merging into highway traffic, that way, you can see where cars are relative to you, and will be able to time your merge better. Check your rear-view mirror and left side mirror as you merge in order to identify a gap in the flow of traffic. Once you’ve found your gap, merge quickly to the left. Spend no more than 2-3 seconds moving from the on-ramp to the highway proper.
If you’re going straight, place it in the neutral position. If you’re turning left, press the lever down. If turning right, keep your signal on in the right-hand turn position all the way to the end of the off-ramp.
First, put your turn signal on in the direction you wish to go. To move into the right lane, push your turn signal up to let others know you wish to move to the right. To move into the left lane, push your turn signal lever down to indicate that you wish to move into the left lane. Activate the turn signal at least five seconds before you wish to change lanes. [7] X Research source Don’t switch the signal on for just one or two flickers. Place it in the locked position just as you would when making a turn. If all is clear, turn your wheel slightly toward the lane you wish to merge into. Once you’re completely within the boundaries of the lane, move your left hand to your turn signal lever and switch it off. Do not cross multiple lanes of traffic with a single activation of your turn signal. If you know you need to cross many lanes, give yourself the adequate time and space to do so. Plan your lane merges ahead of time.
