Installation in the center of a stud is always preferred, because it is a load-bearing support. Walls, especially dry wall, are not designed to hold large, heavy objects by themselves. Wall plugs are designed to hold a certain amount of weight—so, the item you’re hanging and the wall assembly you’re hanging it on (block, drywall, tile, etc. ) will actually dictate what type of anchor you’re going to use.
If the wall plugs and screws are sold separately, test the screws by inserting them inside the plug. If it fits through the center and comes out the other end with a few mm to spare, the screw will likely work with that plug. These universal wall plugs and screws often come with hanging objects in the original packaging.
If the wall plugs and screws are sold separately, test the screws by inserting them inside the plug. If it fits through the center and comes out the other end with a few mm to spare, the screw will likely work with that plug. These universal wall plugs and screws often come with hanging objects in the original packaging.
Once screwed in the wall, you will need to hammer the screw the rest of the way in to complete the process.
If you don’t have a power drill, find a nail that is the size of the plug and pound that in to create your pilot hole. [5] X Research source
